Brick Cleaning Tips

Brick cleaning can help you reclaim the beauty of your masonry, whether it’s an indoor fireplace wall covered in grease or an outdoor facade that has become overgrown with moss. Use caution when applying cleaners, as they can react with different types of materials and surfaces.

Protect yourself and the environment by wearing rubber gloves, safety goggles, and a facemask. Cover nearby plants and vegetation with a tarp to prevent them from contact with any cleaning solvents or chemicals. See our home page.


Brick walls and floors can collect dirt, stains, and other debris that dull their beauty. Regular dusting with a broom or vacuum cleaner can help keep brick surfaces looking clean. In more severe cases, a thorough cleaning will be required. This can be done using a variety of methods, including scrub brushes and DIY sprays.

Prior to applying any cleaning solution, itís important that the brick be thoroughly dusted or swept to remove loose particles and debris. This will allow the cleaner to reach all areas of the surface, rather than being pushed into crevices or remaining on top of dirt that has already been loosened.

Next, the brick surface can be sprayed with a mild detergent mixture. If youíre using a DIY spray, make sure the water is warm enough to be safe for brick, and follow the mixing directions on the bottle. Alternatively, you can scrub a three-by-three-foot section of the brick with either dish soap and salt or boric acid (donning rubber gloves and safety glasses is highly recommended). Then rinse the brick section.


Brick is a durable material that looks good inside and outside the house, but it does need routine cleaning to keep it looking fresh. If you don’t mind the odor, natural cleaners like white vinegar can work wonders on your brick surfaces. If you want something a little stronger, try boric acid or a commercial pressure-washing cleaner designed to be used in masonry.

Regardless of what type of cleaning solution you choose, it’s important to saturate the brick with water before applying it. This loosens any dirt and grime that is stuck to the surface, making it easier to scrub off with a brush.

For stubborn stains, you can also use a mixture of bleach and water to create a powerful brick-cleaning solution. Be sure to mix the solution in a bucket rather than directly on the brick, and always wear rubber gloves when handling strong chemicals. If any of the cleaning agents get on your skin, rinse the area with water immediately and contact poison control for further instructions.


Brick is porous and can absorb a lot of detergents, so itís important to wash brick thoroughly with the right cleaner and at the correct dilution ratio. If the cleaner is too strong, it will sit within the pores of the brick and degrade it over time. The wrong dilution ratio can leave the brick etching and burning, or it may stain with a metallic residue.

To remove rust, soil, or mortar stains from brick surfaces, you can scrub the surface with a brush and a quality brick and masonry cleaning solution. A quality masonry detergent contains mild acids, which help break up and dissolve tough stains.

If the stains are especially stubborn, you can use muriatic acid (an industrial-strength solvent) to obliterate them. Wear full safety gear, including rubber gloves, safety glasses, and a respirator. Fill a bucket with warm water and add one-and-a-half cups of muriatic acid (always pour the acid into the water, never the other way around). Dip a brush in the solution, then work it into a three-by-three-foot section of the brick surface. Scrub gently and let the acid dwell on the brick for a few minutes before rinsing off completely with a hose and ordinary water.


Brick masonry is exposed to a variety of environmental pollutants and weather conditions. Over time, this can cause the masonry to become damaged or discolored. Cleaning brick masonry is often necessary to maintain its appearance and structural integrity. Dirt, dust, and debris buildup are the main contributors to brick damage.

During the brick cleaning process, it is important to wear long-sleeved clothing and protective gloves. Some cleaners can irritate the skin. Also, it is a good idea to work in a well-ventilated area.

Prior to applying any cleaning solution, saturate the brick surface with water using a spray bottle. This will prevent the dry brick from absorbing the cleaning solvent and causing soap scum or corroding. Depending on the severity of the staining, you can then choose to scrub the brick using a brush and detergent or use boric acid to scour the stains from the brick. Make sure to follow the recommended dilution ratio of the cleaning solution and use goggles and gloves for safety. Next article.

Get $25 Off Now!

When You Request Any Two Services Together - Use Code [ 25-OFF ]