Why You Should Consider Power Washing Your Brick House Before Painting

power washing brick house

The average cost of painting a house exterior is about $3,089. This means that if you have a brick house, you could be spending a lot of money on paint that isn’t even adhering properly to the surface.

And this is why you should consider power washing a brick house before painting your home is necessary. Sadly, many homeowners overlook this crucial step when painting their brick houses, unknowingly compromising the integrity and longevity of their paint job.

In this post, we’ll explore the remarkable benefits power washing can bring to your brick house. Read on to discover the secrets behind a picture-perfect and enduring transformation.

Benefits of Power Washing Your Brick House Before Painting

When preparing to paint your brick home, power washing services offer a multitude of benefits that go beyond the surface. From enhancing curb appeal to protecting your property, this is one task you don’t want to skip when painting your exterior.

Here are good reasons why you should leave power washing to the professionals:

Deep Cleaning

One of the primary benefits of power washing brick house is the ability to achieve a deep and thorough clean. Professional-grade equipment, combined with experienced technicians, ensures that even the toughest stains, dirt, mold, and mildew are removed from various surfaces.

Enhanced Curb Appeal

By investing in professional power washing, you can significantly enhance the exterior appearance of your property. Whether it’s your home, office building, or any other structure, power washing helps to revive the beauty and vibrancy of its surfaces, making a positive first impression on guests, clients, or potential buyers.

Increased Property Value

Regular power washing not only keeps your property looking its best but also helps maintain its value. As dirt, grime, and environmental contaminants accumulate over time, they can cause long-term damage to the exterior surfaces. By regularly power washing, you protect your property, preventing premature deterioration and preserving its value.

Preventive Maintenance

Power washing can serve as an essential part of your property’s preventive maintenance routine. By removing dirt, algae, and other contaminants, you can prevent potential issues such as mold growth on bricks. Regular power washing helps protect your property from costly repairs and extends its lifespan.

Improves Paint Adhesion

By thoroughly cleaning and slightly roughing up the surface, power washing creates an ideal texture for paint adhesion. The paint has more surface area to grip onto, so it sticks better and lasts longer.

Without this roughened, porous surface, paint may not bond as strongly and can chip or scratch more easily.

Safe Alternative to Sandblasting

Power washing provides an effective deep clean for brick without the damage caused by sandblasting. Sandblasting actually erodes the surface of the brick, permanently altering its texture. Power washing cleans deeply while still preserving the integrity of the brick.

How to Power Wash a Brick House

If you’re a homeowner looking to refresh the look of your brick house, this guide will walk you through the process of professional brick house power washing. Learn how you can make your home a beautiful sight to behold with power washing.

Step 1: Gathering the Necessary Equipment

To get started, you’ll need to gather some essential equipment. The basic necessities for power washing brick include high-pressure power washer and safety gear.

Step 2: Power Washing Brick House – The Prep

Before turning on your power washer, you’ll want to prepare the area around your brick house. Clear the exterior of any debris like leaves, dirt, or mulch up against the walls. Cover or remove anything you don’t want to get wet like outdoor lighting fixtures, doorknobs, or house numbers.

You should also lay a plastic tarp or ground cloth along the foundation of the house to collect runoff. Wearing proper protective gear like rubber boots, gloves, eye protection, and old clothes will keep you safe from spraying water and brick particles.

Once the area is prepared, you’re ready to get cleaning. The key is starting from the top and working your way down in sections using slow, overlapping passes with your power washer wand. Take your time for the best results.

Step 3: Pre-Treating the Surfaces

To loosen stubborn dirt and grime before power washing, use a pre-treatment solution. Spray it over the entire brick facade, especially any areas with heavy soiling. Let it sit as directed, usually 3 to 5 minutes.

The solution will break down deposits and stains, allowing you to rinse them away more easily. You may need to scrub some areas with a stiff brush. Be sure to rinse the pre-treatment from the bricks when done to avoid residue.

Step 4: Power Washing the Brick House

Once the house is prepped, it’s time to power wash. Starting from the top down, spray in even strokes. Work in sections across the width of the house. Rinse each section thoroughly after washing before moving down to ensure no detergent residue is left behind.

Pay extra attention to any particularly dirty areas like under eaves, around windows, and near the foundation. For tough stains, use special brick detergents and scrub with a stiff brush

Step 5: Post-Cleaning Inspection

After power washing the entire house, do a final inspection to ensure you achieved the results you wanted. Walk around the perimeter of the house and look for any spots you may have missed or need to go over again.

Pay extra attention to corners and edges where dirt and grime often build up. Go over these areas once more with the power washer to give your brick house a clean appearance.

Make sure there are no remaining streaks or water spots before calling it a day. If there are, wipe them away with a clean, soft cloth. Stand back and take in the transformation. Your brick house should now look as good as new with the aged patina and its character restored.

Step 6: Post-Cleaning Maintenance

Once you’ve power washed your brick house, it’s important to perform some post-cleaning maintenance to protect your investment. Apply a sealant or waterproofing product to the bricks within 2-3 days of power washing.
This will protect the porous bricks from water damage and staining. Re-sealing every 3-5 years will keep your house looking freshly power washed.

Revitalizing Your Brick House – The Magic of Power Washing a Brick House

Power washing a brick house can be a daunting task, but it doesn’t have to be. Look no further than Spartan Home Services. With our help, you can get your home looking its best in no time.

Our team of skilled professionals is dedicated to providing you with exceptional solutions for all your home needs. Get a quote in minutes!

This field is for validation purposes and should be left unchanged.

Share this post

We Want You To Know...

We're Comitted To Your Happiness

Super Awesome benefits for you to enjoy...

exterior cleaning services



& Insured


exterior cleaning services 1


Get $25 Off Now!

When You Request Any Two Services Together - Use Code [ 25-OFF ]

Services Needed
Pressure Washing in Fairfield CT, Pressure Washing in Trumbull CT, Pressure Washing in Milford CT, Pressure Washing in Shelton CT, Pressure Washing in Orange CT, Pressure Washing in Monroe CT, Pressure Washing in Stratford CT, Pressure Washing in Seymour CT, Pressure Washing in Oxford CT, Pressure Washing in New Haven CT, Pressure Washing in New Haven County CT, Pressure Washing in Fairfield County CT, Pressure Washing in Meriden CT, Pressure Washing in Waterbury CT, Pressure Washing in West Haven CT, Pressure Washing in Bridgeport CT, Pressure Washing in Danbury CT, Pressure Washing in Greenwich CT, Pressure Washing in Norwalk CT, Pressure Washing in Stamford CT